Print…

You Searched For: Block Heaters

Block heaters and coolers use interchangeable, modular blocks for housing tubes, vials, reaction vessels, and other laboratory containers. Both analogue and digital models offer repeatable results and temperature stability. An array of blocks can be purchased separately as well to meet specific needs. Shaking heaters and coolers completely mix samples at a designated temperature for homogenous blends. Sample concentrators feature quick sample evaporation when used with block heaters.

Block heaters and coolers use interchangeable, modular blocks for housing tubes, vials, reaction vessels, and other laboratory containers. Both analogue and digital models offer repeatable results and temperature stability. An array of blocks can be purchased separately as well to meet specific needs. Shaking heaters and coolers completely mix samples at a designated temperature for homogenous blends. Sample concentrators feature quick sample evaporation when used with block heaters.


78  results were found

Refine Results Sort by
SearchResultCount:"78"

Sort Results

List View Easy View (new)

Rate These Search Results

Image Unavailable-BSANBS-010143-GK

Interchangeable blocks for thermo mixer

Supplier: BIOSAN
Description: Block heater block, Interchangeable tube block, SC-24C, For: 24×2 ml microtubes

Image Unavailable-BSANBS-010143-AAI

Thermo mixer, cooling thermal shake

Catalog Number: (BSANBS-010143-AAI)
Supplier: BIOSAN
Description: This thermo shaker provides intense mixing and temperature control of the samples in PCR plates or micro test tubes up to a temperature of +4 °C. Heating and mixing functions can be performed both simultaneously and independently.
UOM: 1 * 1 items
Product Image-TECN36620-10

Cole Parmer® Dri-Block® BH-250 Heaters

Supplier: Cole-Parmer
Description: Choose a heater, then blocks to suit your application needs!

Product Image-ORIOCOD165

Orion™ AQUAfast COD165 Thermoreactor

Catalog Number: (ORIOCOD165)
Supplier: Thermo Orion
Description: Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100, 120, 150, 160, 165 °C and four preset run times of 30, 60, 120 minutes or continuous time. Simply place 16 mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.
UOM: 1 * 1 items
Product Image-TECN36620-17

Cole-Parmer® CB-200 Block Chiller/Heater

Catalog Number: (TECN36620-17)
Supplier: Cole-Parmer
Description: Safely maintain biological samples.
UOM: 1 * 1 items
Image Unavailable-ASYNADS2-2

DrySyn® MAXI Heating Blocks, 2 L

Catalog Number: (ASYNADS2-2)
Supplier: ASYNT
Description: The DrySyn® MAXI 2 L is a stand-alone 2000 ml version of the standard DrySyn MAXI Kit (which alternatively has a 3000 ml base and 2000 ml insert) which comes with heat resistant safety lifting handles.
UOM: 1 * 1 items
Product Image-HACHLTV073

Thermostatic block heater for cuvettes, LT 20

Catalog Number: (HACHLTV073)
Supplier: Hach
Description: Block heater/cooler, Hach®, LT 20, Thermostatic block heater, bench-top, 80 % relative humidity, non-condensing, Temperature Range: 10...30 °C
UOM: 1 * 1 items
Product Image-LBCP7321600

Blocks for RapidVap® Vertex™ dry block evaporators

Supplier: LABCONCO
Description: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Product Image-442-1238

DrySyn® heating blocks

Supplier: ASYNT
Description: The DrySyn heating block range is the alternative to oil baths and heating mantles. The systems offer clean, safe synthesis for single or multiple reactions.

Product Image-442-0870

DrySyn® single- and multi-position cooling blocks, DrySyn COOL and Multi COOL

Supplier: ASYNT
Description: For controlled cooling of 25 to 1000 ml flasks without using jacketed reaction vessels. Units allow active temperature control from +150 to −30 °C (depending on circulator specification).

Product Image-HACHLTV0829930001

Digital block reactor, DRB 200

Supplier: Hach
Description: Digital block heaters which can hold one or two heating blocks, units allow cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. Heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings.

Product Image-MANA919330

Block heaters, NANOCOLOR®

Supplier: MACHEREY-NAGEL
Description: Digestion of the sample is an important step in photometric water analysis. The NANOCOLOR® VARIO 4 heating blocks with 24 holes for 16 mm Ø test tubes perform all required sample digestions in water and waste water analysis quickly and safely. The unit features 4 pre-programmed heating times: 30/60/120 min or continuous and has 8 free memory locations for individual heating times. There are 5 pre-programmed temperatures: 70/100/120/148/160 °C and 7 free memory locations for individual temperature settings. Temperature stability is ± 1 °C (according to DIN, EN, ISO and EPA methods). Warm-up time from 20 to 160 °C within 10 minutes.

MSDS

Image Unavailable-JENC357-133

Interchangeable blocks for block heaters, digital, SB1

Supplier: JENCONS SCIENTIFIC
Description: Interchangeable blocks are made of high grade, non porous, anodised aluminium. Except the blocks used for plates and slides, all other blocks include positions for a block lifter and calibration thermometer.

Product Image-705-0856

Dry block thermostat for cuvettes, LT 200

Supplier: Hach
Description: A digestion step often has to be carried out before key parameters can be determined. For these parameters, the LT 200 thermostat complements the LANGE cuvette test system. Two separately controllable heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. The LT 200 has a digital timer with an automatic switch-off and acoustic signal. Two transparent splash protection lids cover the thermostat while it is heating. The integrated over-temperature feature and the insulated external casing provide additional safety.

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Dual use goods can only be delivered within the European Union.
Dual use goods can only be delivered within the European Union.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +43 1 97002 - 0.
65 - 78 of 78
no targeter for Bottom