Print…

You Searched For: Mops

Regardless of where the mess is located, mops and squeegees efficiently reestablish spotless and safe work spaces. Choose between foam and the traditional microfiber yarn strand designs for high liquid absorption to maintain critical aseptic environments. Ergonomic pole handles on dry and wet mops allow easy manipulation for even the hard to reach areas. Designed for heavy routine use, mop heads can easily be cleaned in between uses or replaced for convenience.

Regardless of where the mess is located, mops and squeegees efficiently reestablish spotless and safe work spaces. Choose between foam and the traditional microfiber yarn strand designs for high liquid absorption to maintain critical aseptic environments. Ergonomic pole handles on dry and wet mops allow easy manipulation for even the hard to reach areas. Designed for heavy routine use, mop heads can easily be cleaned in between uses or replaced for convenience.


153  results were found

Refine Results Sort by
SearchResultCount:"153"

Sort Results

List View Easy View (new)

Rate These Search Results

Product Image-141-0980

QuickTask™ flat mops

Supplier: CONTEC
Description: QuickTask™ mopping system. The QuickTask™ product line consists of a variety of knitted polyester, polyester/cellulose, microfibre/foam and microfibre flat mop heads that are easily installed onto a hinged mop head frame and QuickConnect interchangeable handle. QuickTask™ mop head frames are available in stainless steel or durable, autoclavable polypropylene.

Product Image-CONT2769-KIT

Bucket system, 20 L

Catalog Number: (CONT2769-KIT)
Supplier: CONTEC
Description: Polypropylene bucket system is a stainless steel rolling cart with two polypropylene 20 L buckets, stainless steel drip cap, and angled stainless steel wringer.
UOM: 1 * 1 KIT
Product Image-PPSA3590200

Squeegee mop and handles

Supplier: PFENNIG REINIGUNGSTECHNIK
Description: Squeegee mops and handles for hygienically sensitive areas.

Product Image-CONTPSTA0022-BPR

PROSAT® QuickTask™ Mopping System

Supplier: CONTEC
Description: Mops presaturated with USP Grade IPA provide consistency between operators and eliminate the need to take extra cleaning solution and separate Mops and buckets into a room. Presaturated Mops allow for targeted application of IPA to surfaces. They eliminate the risk of flammable liquid spills and reduce IPA usage and VOCs. Presaturated Mops also provide an ergonomic option to remove residues.

Image Unavailable-CONTMGMP0009

MicroGenesis Mop

Catalog Number: (CONTMGMP0009)
Supplier: CONTEC
Description: Single-use microfiber mop pads.
UOM: 1 * 6 items
Product Image-PPSA2160000

Cleanroom mops, SilberKing

Catalog Number: (PPSA2160000)
Supplier: PFENNIG REINIGUNGSTECHNIK
Description: Mops for all hygienically sensitive areas, buildings without dryer.
UOM: 1 * 1 items
Product Image-PPSA2016115

Mop handles, stainless steel

Catalog Number: (PPSA2016115)
Supplier: PFENNIG REINIGUNGSTECHNIK
Description: Stainless steel telescopic handles are autoclavable.
UOM: 1 * 1 items
Product Image-129-0220

Mop with handle, BetaMop™ II

Catalog Number: (129-0220)
Supplier: Texwipe
Description: BetaMop™ II features a tubular-knit polyester mop head for economical floor cleaning. Quick change clamp assembly.
UOM: 1 * 1 items
Product Image-MMMAET7449

Easy Trap Duster Sheets

Supplier: 3M
Description: 3M™ Easy Trap Duster system traps and holds six times more dust, dirt, sand, and hair than traditional mops and other disposable dusting systems.

Product Image-141-0102

Cleanroom compatible mopping system, ClipperMop™

Supplier: Texwipe
Description: ClipperMop™ cleanroom mops are designed to use standard 230×230 mm (9×9'') and 310×310 mm (12×12'') cleanroom wipes, eliminating the need to qualify and inventory additional wipes or mop covers. The mophead uses non abrasive polyethylene clips to securely fasten one or more wipes to the head. The ClipperMop™ wipe attachment method does not release particles, fibres or dirt. The mop system can be sterilised by gamma irradiation, chemicals, vapourised hydrogen peroxide (VHP) or ethylene oxide (EtO). The powder-coated steel, telescopic handle extends from 73 to 134 cm.

Certificates

Product Image-MICRMZNS6-14IR

NovaSnap™ Mops

Supplier: MICRONOVA
Description: This low-touch flat mop uses a simple snap-on, step-release clip action for improved cleanliness and ergonomics. Simply align the components and push into place. The ergonomic unit weighs less than 2 pounds (0,8 kilos) – handle, adapter, and NovaSnap™ mop.

Product Image-MICRPKM11-14

Cleanroom mops, PocketMop™

Supplier: MICRONOVA
Description: These mop can be used for controlled environments and is economical enough to compete with commercial mops that are often used in support or non-classified areas.

Product Image-129-0629

Flathead mop covers and hardware, Slimline™

Supplier: MICRONOVA
Description: A series of elasticised slipcovers, with urethane foam interiors, that are ideal for fine cleaning and sanitising all surfaces and equipment in the cleanroom. Available without a foam interior or gamma irradiated for aseptic environments.

Product Image-MICRMZFM7-18

Flat mops

Supplier: MICRONOVA
Description: These brick-style, flat sponge mop heads are excellent for applying disinfectant in pharmaceutical production or aseptic processing applications.

Product Image-141-1062

Isolator cleaning tool

Supplier: Texwipe
Description: Isolator cleaning tool: Mop hardware, replacement head, replacement handle.
Specially engineered to work with isolators and other small areas, this easy to manoeuvre tool offers lightweight, one handed operation. With a low profile, swivel head, the isolator cleaning tool gets into 'hard to reach' places.
Engineered for quick cover changes during operation, the padded head allows for a consistent mop across different surfaces without losing cleaning power. The rounded edges clean the isolator corners and prevent scratches or damage to surfaces.

Product Image-129-0241

Mops, LoopMop™

Supplier: MICRONOVA
Description: Knitted polyester mop for applying disinfectant in pharmaceutical, aseptic processing and medical device applications. Absorbent enough to clean to a dry finish but will leave enough moisture for disinfectants that require an extended drying time. Mop heads can be used directly with the fibreglass/polypropylene handle or attached to the universal handle via the quick disconnect adapter.

Environmentally Preferable

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Dual use goods can only be delivered within the European Union.
Dual use goods can only be delivered within the European Union.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +43 1 97002 - 0.
65 - 80 of 153
no targeter for Bottom