Print…

You Searched For: Homogenisers

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.


166  results were found

Refine Results Sort by
SearchResultCount:"166"

Sort Results

List View Easy View (new)

Rate These Search Results

Product Image-REST31613

Test mix E1618 (13 components)

Catalog Number: (REST31613)
Supplier: Restek
Description: Components in this mix (0,5 μl/ml or 0,05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.
UOM: 1 * 1 mL
Product Image-REST31230

Kerosene (ASTM Class 4 accelerant)

Supplier: Restek
Description: These solutions are prepared from a single-source (one-refinery) product.

Product Image-REST31491

WA EPH fractionation check mix (22 components)

Catalog Number: (REST31491)
Supplier: Restek
Description: The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane, acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.
UOM: 1 * 1 mL
Product Image-REST31240

Fuel oil degradation mix (4 components)

Catalog Number: (REST31240)
Supplier: Restek
Description: Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.
UOM: 1 * 1 mL
Product Image-REST31676

Diesel #2/mineral oil (2 components)

Catalog Number: (REST31676)
Supplier: Restek
Description: The mix consists of diesel fuel #2 composite, mineral oil.
UOM: 1 * 1 items
Product Image-REST31839

Hydraulic oil standard

Catalog Number: (REST31839)
Supplier: Restek
Description: This is for total petroleum hydrocarbon pattern recognition of hydraulic oil.
UOM: 1 * 1 Ampoul
Product Image-REST30670

ASTM D3606 quality control standard with sec-butanol internal standard (3 components)

Catalog Number: (REST30670)
Supplier: Restek
Description: Contains three components, those are benzene, 2-butanol (sec-butyl alcohol) and toluene.
UOM: 1 * 25 mL
Product Image-REST30730

DHA PiONA standard (133 components)

Catalog Number: (REST30730)
Supplier: Restek
Description: This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.
UOM: 1 * 1 items
Product Image-REST30728

DHA Naphthenes standard (26 components)

Catalog Number: (REST30728)
Supplier: Restek
Description: This naphthenes standard is produced for refineries performing detailed hydrocarbon analysis (DHA) of crude oil feedstocks and fuels.
UOM: 1 * 1 items
Product Image-REST31818

Residual range calibration verification standard (CVS)

Catalog Number: (REST31818)
Supplier: Restek
Description: SAE30 motor oil:SAE40 motor oil (1:1).
UOM: 1 * 1 Ampoul
Product Image-REST31639

Alternate boiling point/carbon number distribution marker stock standard (9 components)

Catalog Number: (REST31639)
Supplier: Restek
Description: The mix consists of (C6) n-hexane, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C28) n-octacosane, (C35) n-pentatriacontane, (C36) n-hexatriacontane.
UOM: 1 * 1 mL
Image Unavailable-REST31066

Diesel surrogate and internal standards

Supplier: Restek
Description: 5-α-Androstane, 2000 μg/ml in methylene chloride, 1 ml/ampule, for internal standard

Product Image-REST30487

Stoddard solvent standard

Catalog Number: (REST30487)
Supplier: Restek
Description: Stoddard solvent, a petroleum distillate mixture of C7-C12 hydrocarbons, consists of three major groups of components: linear and branched alkanes-also known as paraffins (30 to 50%); cycloalkanes-also called cycloparaffins or naphthenes (30 to 40%); and aromatic hydrocarbons (10 to 20%).
UOM: 1 * 1 mL
Product Image-REST31223

Calibration mix D3710-95 (16 components)

Catalog Number: (REST31223)
Supplier: Restek
Description: These calibration mixtures are made with pure, highly characterized neat material and are prepared using NIST-traceable balances and weights. Each ampul is supplied with a data sheet indicating the exact concentration and a sample chromatogram.
UOM: 1 * 1 items
Product Image-REST31261

Mineral spirits standards (unweathered)

Supplier: Restek
Description: This standard is manufactured using the Type 1 mineral spirit.

Product Image-REST31214

DRO mix (Tennessee/Mississippi) (16 components)

Catalog Number: (REST31214)
Supplier: Restek
Description: DRO mix (Tennessee/Mississippi), 1000 μg/ml each in methylene chloride, Pk Info: 1 ml/ampoule
UOM: 1 * 1 items
Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Dual use goods can only be delivered within the European Union.
Dual use goods can only be delivered within the European Union.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +43 1 97002 - 0.
33 - 48 of 166
no targeter for Bottom