You Searched For: Vacuum Diaphragm Pumps

Supplier: VACUUBRAND

Description: For use in explosive areas chemistry diaphragm pumps category 2 with ATEX conformity are available.

Supplier: VACUUBRAND

Description: The three-stage VARIO-SP® diaphragm pumps, with its variable speed drive system, attains significantly higher pumping speed and a better ultimate vacuum than the corresponding fixed speed pump. The brushless motor (maintenance-free) enables easy integration of the pump into other equipment, and operation independent of line voltage. The motor speed is either fixed or can be adjusted externally via electronic control signals for adaptation to process requirements.

Supplier: VACUUBRAND

Description: This VARIO® chemistry pumping unit optimizes vacuum conditions automatically by precisely and continuously adjusting the diaphragm pump´s motor speed. Thanks to the motor speed control the pump operates only when vacuum is needed, saving energy and reducing maintenance.

Catalog Number: (VACU25744750)

Supplier: VACUUBRAND

Description: Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

UOM: 1 * 1 items

Sale

Catalog Number: (181-0580)

Supplier: Welch by Gardner Denver

Description: The perfect partner for your rotovap. Faster, better quality distillation and solvent concentration.

UOM: 1 * 1 items

Sale

Supplier: Welch by Gardner Denver

Description: All standard WOB-L piston pumps are recommended for pumping vapors of aqueous solutions including buffers but not for acidic, basic or organic vapours or gases.

Catalog Number: (181-0339)

Supplier: VACUUBRAND

Description: This VARIO® chemistry pumping unit provides vacuum control by precise and continuous adaptation of the diaphragm pump's motor speed. The on-demand motor speed control extends diaphragm lifetime considerably.

UOM: 1 * 1 items

Sale

Supplier: VACUUBRAND

Description: These chemistry pumping units use chemical resistant solenoid valves to maintain process control. Once the first boiling point is detected by the controller, it maintains the pressure at this level. Pumping units can be configured to run one or two independent processes at the same time.

Supplier: VACUUBRAND

Description: The VACUU·SELECT controller simplifies your work and allows VARIO® select chemistry pumping systems to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions.

Supplier: VACUUBRAND

Description: <B>Chemistry diaphragm pumps: </B>Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: Welch by Gardner Denver

Description: The MPC chemical duty diaphragm pumps use PTFE and other fluorinated plastics for the wetted parts to allow aggressive solvent and acid vapours to be pumped. If the pump should handle harsh chemical vapours, then the superior chemical resistant X2 version with higher grade seals and thicker coatings are the best choice. These are well known for quiet operation and running smoothness.

New Product

Supplier: VACUUBRAND

Description: Compact, powerful pump gives ideal solution for continuous, oil-free pumping of corrosive gases and vapors with exceptional high pumping speed. Eight-cylinder NT pump features quiet operation with smooth, easy-to-clean surfaces.

Catalog Number: (188-0006)

Supplier: VACUUBRAND

Description: Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

UOM: 1 * 1 items

Sale

Catalog Number: (181-0159)

Supplier: VACUUBRAND

Description: The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

UOM: 1 * 1 items

Sale

Supplier: VACUUBRAND

Description: These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

Description: The VACUU·SELECT controller simplifies your work and allows VARIO select chemistry pumping systems to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes pre-defined applications for all common vacuum processes.