You Searched For: EDWARDS HIGH VACUUM METTLER

Supplier: EDWARDS HIGH VACUUM METTLER

Description: ULTRAgrade® 15 and 19 oils result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique hydrotreating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Mist filters are used to separate and trap oil mist and dischage the odours with the exhaust from oil sealed rotary vacuum pumps.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Centring rings suitable for connections with NW flanges.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Elbows 90°, DN 25 mm, Aluminium

Supplier: EDWARDS HIGH VACUUM METTLER

Description: The E1M18 and E2M18 pumps are direct drive, sliding vane pumps. The E1M18 is a single-stage pump, and the E2M18 is a two-stage pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.

Catalog Number: (EDWAC10514316)

Supplier: EDWARDS HIGH VACUUM METTLER

Description: This flange fittings made from stainless steel 316L are ideal for rugged corrosion resistance in semiconductor processing and offer excellent repeatability in high vacuum applications.

UOM: 1 * 1 items

Sale

Catalog Number: (EDWAH11301019)

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Fomblin® perfluoropolyether oil for use in oil sealed rotary vacuum pumps and are practically a direct replacement for mineral oil in terms of viscosity and vapour pressure. Also it contains Drynert fluid which contains anti-rust and anti-wear additives soluble in Fomblin®. These additives cover metallic surfaces with a protective, corrosion resistant film.

UOM: 1 * 1 kg

Sale

Catalog Number: (EDWA11026015)

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Ultragrade® 15 oil

UOM: 1 * 1 L

Sale

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Reducing pieces made of aluminium.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Elbows 90°, DN 40 mm, Stainless steel

Supplier: EDWARDS HIGH VACUUM METTLER

Description: T-pieces made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.

Catalog Number: (EDWAH11150001)

Supplier: EDWARDS HIGH VACUUM METTLER

Description: A range of Apiezon® greases is offered for use on high vacuum systems and for many general applications in the laboratory. These high purity greases are non-toxic, are easy to apply and clean off and have long shelf lives.

UOM: 1 * 25 g

Sale

Supplier: EDWARDS HIGH VACUUM METTLER

Description: The XDS pumps are used as a patented bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapours. Adjustable gas ballast allows vapour to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS-C range are designed for pumping condensable vapors and use materials selected for a wide range of laboratory wet chemistry applications.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: Hinged clamps for NW flanges made of aluminium.

Supplier: EDWARDS HIGH VACUUM METTLER

Description: The active gauge displays are a range of simple, low cost units for the measurement and control of vacuum from atmosphere to 10^-9 mbar.