You Searched For: Agilent

Supplier: Agilent

Description: Chromatography vial closure, PP, Ø: 9 mm, Type: Blue, certified, Septum: PTFE/red rubber

Certificates

Supplier: Agilent

Description: Chromatography vial, Headspace crimp neck, 20,00 ml, Glass, Clear, Ø×H: 23×75 mm, Flat bottom, Non sterile, Cap included: No

Certificates

Supplier: Agilent

Description: Capillary electrophoresis system (CE), accessory, Spare part, Glass filter, solvent inlet, 20 μm

Supplier: Agilent

Description: Chromatography vial, Crimp neck, 2,00 ml, Glass, Clear, Ø×H: 12×32 mm, Flat bottom, Non sterile, Cap included: No

Supplier: Agilent

Description: These vials are certified for full warranted compatibility with Agilent autosamplers. The screw caps and precision fit septa give a secure seal with microvolume inserts.

Supplier: Agilent

Description: Frits, PTFE, For: 1100/1120/1200/1200 RRLC and 1220/1260/1290 infinity LC pumps

Supplier: Agilent

Description: These syringes with fixed needle are compatible with Agilent autosamplers 7693A and 7683.

Supplier: Agilent

Description: High quality SampliQ SPE (Solid Phase Extraction) products help the user confidently extract and concentrate samples from complex matrices, ensuring fast, accurate, and reproducible results from the very first step. The SampliQ line includes polymers, silica and non-silica options to meet user's specific SPE needs.

Supplier: Agilent

Description: Pre-aligned fused-silica capillaries from Agilent Technologies are designed and optimised for ease of use and reliability. All capillary ends are cut to a smooth, mirror-like finish. In addition, the polyimide outer coating is removed from the ends. These processes ensure minimal sample adsorption and help maintain sharp peak shapes. All capillaries have a pre-made detection 'window' and a built-in alignment stopper that allows rapid and precise insertion in the alignment interface.

Supplier: Agilent

Description: Step 2: Dispersive SPE cleanup
Select the dispersive SPE kit suited to the type of food being analysed and the method you are following. In this step, an aliquot of the sample extract from step one (see QuEChERS extraction kits) is added to a 2 or 15 ml centrifuge tube containing a small amount of SPE sorbent and MgSO₄. The sorbent will pull out interfering matrix materials from the sample, while the MgSO₄ helps remove excess water and improve analyte partitioning.

Supplier: Agilent

Description: Polycyclic aromatic hydrocarbons are chemical compounds consisting of fused aromatic rings formed during the incomplete combustion of organic materials.

Supplier: Agilent

Description: Poroshell 120 is made with a superficially porous particle that has a solid silica core and a porous outer layer. This particle provides high efficiency at lower pressures and is ideal for fast or high-resolution separations of many types of analytes.

Supplier: Agilent

Description: The ZORBAX® Bonus-RP column has a polar amide group embedded in a long alkyl chain. This novel bonding reduces interactions between basic compounds and the silica support, improving peak shape for the most difficult basic compounds. Peak shape and column lifetime are further improved by triple endcapping. In addition, diisopropyl side groups provide steric protection against acid hydrolysis for good lifetime and low pH. The Bonus-RP column provides an alternate selectivity to C18 and C8 alkyl bonded phases.

Supplier: Agilent

Description: For normal phase chromatography, the ZORBAX® product line offers a choice of bonded and non-bonded silica packings.

Supplier: Agilent

Description: DB-WAXetr is a high polarity polyethylene glycol (PEG) column for the analysis of alcohols, solvents, benzenes, styrenes, and organic acids, among others.

Supplier: Agilent

Description: These columns are recommended for alternate selectivity at low pH relative to Eclipse XDB-C18 and StableBond® SB-C18.