Print…

You Searched For: Homogenisers

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.


159  results were found

Refine Results Sort by

Sort Results

List View Easy View (new)
SearchResultCount:"159"

Rate These Search Results

Product Image-REST31613

Test mix E1618 (13 components)

Description: Components in this mix (0,5 μl/ml or 0,05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.
Catalog Number: REST31613
UOM: 1 * 1 mL
Supplier: Restek
Product Image-REST31230

Kerosene (ASTM Class 4 accelerant)

Description: These solutions are prepared from a single-source (one-refinery) product.
Catalog Number: REST31230
UOM: 1 * 1 items
Supplier: Restek
Product Image-REST31491

WA EPH fractionation check mix (22 components)

Description: The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane, acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.
Catalog Number: REST31491
UOM: 1 * 1 mL
Supplier: Restek
Product Image-REST31240

Fuel oil degradation mix (4 components)

Description: Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.
Catalog Number: REST31240
UOM: 1 * 1 mL
Supplier: Restek
Product Image-REST31676

Diesel #2/mineral oil (2 components)

Description: The mix consists of diesel fuel #2 composite, mineral oil.
Catalog Number: REST31676
UOM: 1 * 1 items
Supplier: Restek
Product Image-REST31839

Hydraulic oil standard

Description: This is for total petroleum hydrocarbon pattern recognition of hydraulic oil.
Catalog Number: REST31839
UOM: 1 * 1 Ampoul
Supplier: Restek
Product Image-REST30670

ASTM D3606 quality control standard with sec-butanol internal standard (3 components)

Description: Contains three components, those are benzene, 2-butanol (sec-butyl alcohol) and toluene.
Catalog Number: REST30670
UOM: 1 * 25 mL
Supplier: Restek
Product Image-REST30730

DHA PiONA standard (133 components)

Description: This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.
Catalog Number: REST30730
UOM: 1 * 1 items
Supplier: Restek
Product Image-REST30728

DHA Naphthenes standard (26 components)

Description: This naphthenes standard is produced for refineries performing detailed hydrocarbon analysis (DHA) of crude oil feedstocks and fuels.
Catalog Number: REST30728
UOM: 1 * 1 items
Supplier: Restek
Product Image-REST31818

Residual range calibration verification standard (CVS)

Description: SAE30 motor oil:SAE40 motor oil (1:1).
Catalog Number: REST31818
UOM: 1 * 1 Ampoul
Supplier: Restek
Product Image-REST31639

Alternate boiling point/carbon number distribution marker stock standard (9 components)

Description: The mix consists of (C6) n-hexane, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C28) n-octacosane, (C35) n-pentatriacontane, (C36) n-hexatriacontane.
Catalog Number: REST31639
UOM: 1 * 1 mL
Supplier: Restek
Image Unavailable-REST31066

Diesel surrogate and internal standards

Description: 5-α-Androstane, 2000 μg/ml in methylene chloride, 1 ml/ampule, for internal standard
Catalog Number: REST31066
UOM: 1 * 1 mL
Supplier: Restek
Product Image-REST30487

Stoddard solvent standard

Description: Stoddard solvent, a petroleum distillate mixture of C7-C12 hydrocarbons, consists of three major groups of components: linear and branched alkanes-also known as paraffins (30 to 50%); cycloalkanes-also called cycloparaffins or naphthenes (30 to 40%); and aromatic hydrocarbons (10 to 20%).
Catalog Number: REST30487
UOM: 1 * 1 mL
Supplier: Restek
Product Image-REST31223

Calibration mix D3710-95 (16 components)

Description: These calibration mixtures are made with pure, highly characterized neat material and are prepared using NIST-traceable balances and weights. Each ampul is supplied with a data sheet indicating the exact concentration and a sample chromatogram.
Catalog Number: REST31223
UOM: 1 * 1 items
Supplier: Restek
Product Image-REST31261

Mineral spirits standards (unweathered)

Description: This standard is manufactured using the Type 1 mineral spirit.
Catalog Number: REST31261
UOM: 1 * 5 mL
Supplier: Restek
Product Image-REST31214

DRO mix (Tennessee/Mississippi) (16 components)

Description: DRO mix (Tennessee/Mississippi), 1000 μg/ml each in methylene chloride, Pk Info: 1 ml/ampoule
Catalog Number: REST31214
UOM: 1 * 1 items
Supplier: Restek
129 - 144 of 159