You Searched For: Sodium+hydrogen+sulphite


11 578  results were found

SearchResultCount:"11578"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: Cytiva
Description: Storage phosphor screens capture latent images produced by ionising radiation (X-ray, β, and γ emissions from isotopes such as <sup>14</sup>C, <sup>3</sup>H, <sup>125</sup>I, <sup>131</sup>I, <sup>32</sup>P, <sup>35</sup>S, <sup>33</sup>P, and more.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure. They are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity.

Supplier: Sartorius
Description: Polyethersulfone membrane
The robust polyethersulfone membrane (PESU) is a polymer, stable within a broad pH (1 to 14) and temperature range. Membrane regeneration and depyrogenation is accomplished by using (1 N) NaOH at elevated temperatures. Cassettes are stored in 0,1 N NaOH.

Catalog Number: (SARP3051860701W-SG)
Supplier: Sartorius
Description: Tangential flow cassette, Sartocon®, Membrane: Hydrosart®, Filtration area: 1000 cm², Pore size: 0,2 µm
UOM: 1 * 1 KIT


Supplier: Sartorius
Description: Sartocon® Slice cassettes are made of the same materials and construction and, therefore, the identical flow path length as the Sartocon cassettes, used for larger-scale production. The scale-up and the scale-down is perfectly linear throughout the range of applications, from cell harvesting to protein purification and concentration.

Supplier: Merck
Description: Millipore's 37 mm Aerosol analysis monitors are transparent, disposable, plastic filter holders pre-assembled with Type MF (mixed cellulose esters) Millipore filters. A thin cellulose support seals the filter between monitor sections to distribute sample flow evenly over the filter surface. The three-part design holds the filter in-place when the top section is removed for open aerosol sampling.

Catalog Number: (SARP3021443906E-SG)
Supplier: Sartorius
Description: Hydrosart® membranes are stabilised cellulose based membranes that have been optimised for the biotechnological and pharmaceutical industry. It is a stable polymer that features a broad pH range. Hydrosart® is also extremely hydrophilic, making it non-protein binding, virtually non-foul and has extremely high flux. Membrane regeneration, storage and depyrogenation can be accomplished by using NaOH even at elevated temperatures. These features make Hydrosart® an ideal membrane for biological applications.
UOM: 1 * 1 items


Supplier: Merck
Description: Fluid Contamination Analysis Monitors are transparent, disposable filter holders made from Tenite® plastic and pre-assembled with MF-Millipore filters (effective filtration area is 9 cm²).

Supplier: Cytiva (Formerly Pall Lab)
Description: The disposable Minimate™ TFF capsules, with Omega™ membrane, can perform concentration processes desalting or buffer exchange on the same system with minimal user intervention, and achieves high concentration factors in a single step due to the low hold-up volume of the devices.

Catalog Number: (631-1067)
Supplier: VWR Collection
Description: Filing cabinet in kraft cardboard.
UOM: 1 * 10 items


Catalog Number: (P3558-1KG)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: Paraplast® is a paraffin–polyisobutylene mixture for tissue embedding and infiltration. It is a refined combination of highly purified paraffin with plastic polymers. It produces minimal tissue compression and wrinkle-free sections and cuts to 4 μm thickness with excellent ribbon continuity.
UOM: 1 * 1 kg


Supplier: Sartorius
Description: Vivaflow® 50 and 200 devices are ready to use crossflow cassettes for filtration and concentration of samples from 100 to 3000 ml or 500 to 5000 ml. The membrane surface per device is 50 cm² or 200 cm² respectively. The devices come with all the necessary accessories for running with a laboratory pump and a size 16 pump head. For speeding up the concentration and increasing the volume throughput, up to six Vivaflow® 50 cassettes can be connected together or two Vivaflow® 200 can be connected together. Optimally suited for applications like cell culture supernatant concentration, virus concentration and water concentration this economical product offers a standard of ease of use, reliability and flexibility.

Catalog Number: (P3683-1KG)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: Paraplast Plus® is a tissue embedding medium comprising highly purified paraffin and polyisobutylene with approximately 0.8% DMSO added to improve infiltration, sectioning, and penetration into tissues. It is recommended for tissues that are difficult to process with regular Paraplast®. Paraplast Plus® cuts continuous ribbons at 2 μm thickness or short ribbons at 1 μm thickness.
UOM: 1 * 1 kg


Catalog Number: (631-1065)
Supplier: VWR Collection
Description: Filing cabinet in white cardboard.
UOM: 1 * 2 items


Catalog Number: (45346-250ML-F)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: Epoxy embedding medium, hardener DDSA
UOM: 1 * 250 mL


Catalog Number: (45359-1EA-F)
Supplier: SIGMA ALDRICH MICROSCOPY
Description: The Epoxy Embedding Medium Kit is a very widely used embedding medium for electron microscopy. The embedding formulation originally published by Luft (1961) is excellent for both plant and animal tissues. Due to the low viscosity of the resin, it penetrates the tissue specimen faster than Araldite and other polymers. It hardens easily and uniformly at low temperatures with the addition of dodecenylsuccinic anhydride (DDSA), methyl nadic anhydride (MNA), and the accelerator 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30). Slight shrinkage may occur during curing. This kit is useful for embedding a variety of tissues as a wide range of hardness can be obtained with this resin to suit a specific tissue type by using two different anhydride curing agents (DDSA and MNA).
UOM: 1 * 1 Each

Catalog Number: (HKUL64715444)
Supplier: HERAEUS KULZER
Description: Technovit 9100 is a plastic embedding system used in medicine, botany and zoology.
UOM: 1 * 1 items


Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us at +43 1 97002 - 0.
Dual use goods can only be delivered within the European Union.
Dual use goods can only be delivered within the European Union.
This product has been blocked by your organization. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service at +43 1 97002 - 0.
145 - 160 of 11 578
no targeter for Bottom